Skip to content

Acoustics · Sound isolation · AV

The room is part of the system.

Acoustic design, sound isolation and AV integration for spaces where sound matters.

Start a Project Explore our work

AV integrator, architect or designer?  You bring the system. We engineer the room.

Work with us

Our approach

Sound isn't just what comes from the speaker. The room shapes what you hear.

A room's size, its surfaces and what's behind its walls decide how a system sounds. We design how a room sounds first, then fit the equipment to it — not the other way round.

  1. 01RoomDimensions, structure, use
  2. 02AcousticsHow the room behaves
  3. 03IsolationWhat gets in and out
  4. 04LoudspeakersChosen and placed for the room
  5. 05CalibrationSystem tuned to the space
  6. 06ExperienceWhat you actually hear

What we engineer

Acoustics first. Everything else follows.

All services

Core discipline

Acoustics

Design, treatment, modelling and measurement — absorption, diffusion, bass management and reverberation, decided before anything is built.

DesignTreatmentModellingMeasurement

Core discipline

Sound isolation

Walls, floors, ceilings, doors and HVAC built to keep sound in — and out.

Proof

Measurement & verification

We measure before we design, and again after we build.

Home theatres

Professional spaces

AV integration

Acoustic engineering

Designed by science.

Every room behaves differently. We analyse the room, define the acoustic objectives, design the treatment and verify the result.

  • Acoustic modelling
  • RT60
  • Frequency response
  • Room modes
  • Absorption
  • Diffusion
  • Bass management
  • Treatment drawings
  • Measurement
  • Verification
How we design a room

Standing waves between two walls

Illustration
WallWallRoom length
1st mode2nd3rd

At low frequencies, sound bouncing between parallel walls forms fixed patterns of high and low pressure. A seat at a peak hears too much bass; a seat at a null hears too little. We predict these patterns from the room's dimensions before choosing seat and subwoofer positions.

Spaces we engineer

Residential and professional rooms.

Each space has its own acoustic job: immersion in a theatre, clarity in a boardroom, accuracy in a studio.
Residential

Home theatres

Dedicated rooms designed around the screen, the seats and the system.

Professional

Auditoriums

Speech clarity and even coverage for every seat.

Professional

Conference rooms

Rooms where people and microphones hear each other clearly.

Professional

Studios

Accurate monitoring and isolation from the outside world.

Professional

Screening rooms

Reference playback for review and critical viewing.

Professional

Other professional spaces

Any room where sound quality or privacy matters.

Selected work

Projects

All projects

Home theatres · hyderabad · 2025

Private Villa, Hyderabad.

Challenge
Attached bedrooms and windows, with a bedroom and a study directly below the theatre.
Approach
Room-within-room isolation, then acoustic treatment and calibration for a 7.2.4 system.
Result
Measurements to follow
Read the case study

Sound isolation

Keep sound where it belongs.

Treatment controls how a room sounds inside. Isolation stops sound travelling in or out. It is built into the structure — and it fails at the weakest path.

  • MassHeavier layers block more sound
  • DecouplingBreak the solid path between surfaces
  • DampingTurn vibration into heat
  • AbsorptionFill cavities to stop resonance
  • Flanking pathsSound that goes around the wall
  • Doors, HVAC & structureThe usual weak points
Section · isolated wallIllustration
Existing structure · massAir gap · decouplingFrame + mineral woolIsolation clip & channelTwo boards + dampingIsolation pad · flanking
A generic build-up showing the principle. Each project gets its own section drawings, matched to the structure and the noise targets.
Sound isolation services

How we work

From brief to verified result.

Seven steps, each ending in something you can hold us to.
  1. 01

    Brief

    Goals, room, budget and constraints.

    Scope note
  2. 02

    Measure

    Site survey and baseline readings.

    Survey
  3. 03

    Model

    Predict modes, reverberation and coverage.

    Model report
  4. 04

    Design

    Treatment, isolation and speaker layout.

    Drawings
  5. 05

    Build

    Site coordination and inspection.

    Site checks
  6. 06

    Calibrate

    The system tuned to the room.

    Settings file
  7. 07

    Verify

    Measure again against targets.

    Verification report

For AV integrators

You bring the system. We engineer the room.

We join your project as the acoustic engineer. Your client, your system and your brands stay yours — we design the room they go into and verify it performs.

Your clientYour systemYour brands
  • AV integrators
  • Architects
  • Interior designers
  • Contractors
  • Project managers
  • Consultants
Work With Us How partnering works
  1. 01Acoustic consultation
  2. 02Acoustic modelling
  3. 03Acoustic treatment design
  4. 04Sound isolation
  5. 05Acoustic drawings
  6. 06Material specification
  7. 07Speaker–room integration
  8. 08Subwoofer integration
  9. 09Measurement & verification
  10. 10Calibration support

Equipment

We specify and supply equipment as part of an engineered system.

We choose equipment for the room, the acoustic targets and the system — not by brand.

Explore equipment
LoudspeakersChosen for the roomSubwoofersPlaced by measurementProjectors & screensMatched to the roomAcoustic productsAbsorbers, diffusers, traps

Start a project

Ready to create a better listening space?

Tell us about the room — what it's for, its size and where the project is. We'll reply with the right next step.

Start a Project Book a Site MeasurementWhatsApp